Roots vacuum pump unit is used in many processes of industrial production. Its operation is very simple, but it should also be operated according to the specifications. If the equipment has problems due to improper operation, it will affect the production in the production place. For example, the excessive current will have a direct impact on the equipment. Let’s take a look at how to deal with its excessive current.
1. If the water supply is too large, we should adjust the water supply according to the actual situation;
2. The opening position of suction and exhaust distribution plate is incorrect, and its position shall be adjusted correctly;
3. The exhaust valve plate and valve plate are damaged and replaced in time;
4. There is too much scaling in Roots vacuum pump unit, so the sundries in the pump shall be cleaned regularly;
5. Friction between impeller and pump body or suction and exhaust distribution plate;
6. The motor is broken or the voltage is low;
The above introduces the reasons for the high current of Roots vacuum pump unit. We find that this situation may be caused by different reasons. Corresponding solutions should be taken for different situations, so as to ensure the fault recovery.
(The article comes from the Internet. If reprinting is not allowed, please contact our company to delete it.)If possible, kindly suggest please your working industry/process, working pressure, working medium, etc. Given detailed request helps to gain better-matched customized solution. Thanks for your patience.
your request will be responsed within 3 hours, kindly pay attention to your email please.