As we all know, roots blower has been widely used in many industries. Today, the principle and characteristics of Roots blower in the return process are summarized as follows:
Through the gap, thermal expansion and shrinkage coefficient value to ensure that the return three leaf roots blower can run normally at high temperature, and the temperature is too high, the casting is easy to exceed the expansion coefficient, this is the important technology of the fan, it will affect the fan operation clearance, which will improve our use, users should often uninterrupted maintenance. The specific operation steps are as follows:
First: before disassembling the machine, measure the size of the three blade roots blower, record it, and mark the parts to ensure that the original requirements are met after assembly.
Second: check the fastening of each part of the three blade roots blower and whether the locating pin is loose. Check whether there is oil leakage, scaling, rusting and peeling inside the machine.
Third: pay attention to whether the lubrication and heat dissipation are normal. Pay attention to the quality of lubricating oil. And pay attention to add high-speed butter regularly.
Fourth: we must listen to the operating noise of the blower, pay attention to whether the unit operates under the specified working conditions. Fifthly: the overload of three leaf roots blower will not be displayed immediately sometimes, so please pay attention to the increasing trend of inlet and exhaust pressure, bearing temperature and motor current, so as to determine whether the machine operates normally.
Generally, the three leaf roots blower for material return is the most advanced technology of fan manufacturers. It can continuously operate in high temperature environment, which improves the technical qualification and precision of fan manufacturers.
We are specialized in the production of return three leaf roots blower manufacturers, if encountered in the system selection and design parameters of uncertain factors, you can consult us at any time.
(The article comes from the Internet. If reprinting is not allowed, please contact our company to delete it.)If possible, kindly suggest please your working industry/process, working pressure, working medium, etc. Given detailed request helps to gain better-matched customized solution. Thanks for your patience.
your request will be responsed within 3 hours, kindly pay attention to your email please.
