Air blower for food and beverage filling equipment
Today, the filling machine has the characteristics of high precision, pollution-free, high efficiency and so on. However, the quality of the filling machine varies with the ability and technical level of each enterprise.
With the continuous expansion of filling machine market demand, the improvement of filling machine technology is imperative and imminent. The successful addition of many new elements of science and technology makes the filling machine market enter a new round of rising tide. The successful application of air blower has injected fresh blood into the development of filling machine.
It is widely used in food and beverage filling equipment. It is used to code or label beverage bottles, cans and all kinds of packaged food, cut water and dry, as well as pneumatic conveying of pop cans.
When the air blower is used in the filling machine, the water attached to the inner wall of the container to be filled is sucked away before filling. At the same time, a relative vacuum is formed in the container to facilitate filling. After filling, label the bottle and dry it. The machine is also composed of a blower, which needs to be installed on the bottle conveying line. The bottle is first blown away by the high-pressure and medium pressure blower, and then dried synchronously to improve the efficiency.
There is no need to install air heater equipment. The application of this equipment in the filling machine, ingeniously combined with beautiful, can greatly improve the production efficiency, reduce the production and operation costs, and improve the automation degree of the whole production process, so that the staff operation is easier and more convenient. The development of filling machine is the same as the development of many industries in the society. The purpose is to liberate our own labor and improve production efficiency under the promotion of high technology.
The application features of air blower in food filling equipment are as follows
Easy to install and use, air blower model selection; less oil or no oil operation, the output air is clean; relative to centrifugal fan and medium pressure fan, its pressure is much higher, often more than ten times of centrifugal fan; if the pump body is integral die casting, and uses shockproof mounting foot, the vibration is low; compared with similar fans, its operation noise is lower, can be as low as 5 3dB; maintenance free use, its wear and tear parts are only two bearings, within the warranty period, basically do not need maintenance; mechanical wear is very small, because there is no other mechanical contact parts except bearings, so it has a long service life.
(The article comes from the Internet. If reprinting is not allowed, please contact our company to delete it.)