Vacuum pump oil is suitable for use in reciprocating booster pumps, mechanical booster pumps, and oil sealed mechanical vacuum pumps, as well as various diffusion vacuum pumps. Recommended for vacuum pumps in the fields of handicrafts, ceramics, chemistry, etc. It is a lubricating oil specially developed for vacuum pumps on vacuum equipment, divided into two types: mineral oil and synthetic oil.
What are the misconceptions about using vacuum pump oil
1. Conceptually, new oil is considered the cleanest oil; Dispose of used lubricating oil as’ waste oil ‘. Enterprises have many concerns about purifying oil products, controlling pollution, and reusing old oil.
2. In terms of system, the right to use vacuum pump oil for equipment has been replaced by the supply department for equipment management; In terms of equipment lubrication management, the equipment maintenance technology department has replaced the lubrication management technology department.
3. In terms of regulations, regular oil changes for equipment have been institutionalized instead of quality based oil changes. In the management of hydraulic lubrication in enterprises, human factors far outweigh natural factors. There is currently no complete, scientific, reasonable, and standardized hydraulic lubrication management system.
4. In terms of technology, there is insufficient understanding of the cleanliness of the lubrication hydraulic system and blind selection of vacuum pump oil; And consider the filtration accuracy of the oil filter as cleanliness.
5. In terms of management, replace maintenance equipment with repair equipment. Replace “replacing repair with protection” with “repairing when the equipment is broken”. Very few companies have discovered the implementation of oil purification, proactive maintenance of equipment, and regular oil inspection and analysis.
Vacuum pump oil storage method:
1. Vacuum equipment oil can have a shelf life of up to three years under sealed conditions;
2. Oil products should be stored in a cool and dry place;
3. After opening the oil barrel for use, the remaining oil should be covered with a sealing cap. At the same time, use up the remaining part as soon as possible, and do not mix other powder and liquid impurities;
4. Environmental tools should be kept clean, and if cleaned with solvents, they should be dried and used;
5. Oil products with corresponding accuracy and quality should be selected.
If possible, kindly suggest please your working industry/process, working pressure, working medium, etc. Given detailed request helps to gain better-matched customized solution. Thanks for your patience.
your request will be responsed within 3 hours, kindly pay attention to your email please.
