The type of liquid ring vacuum pump is mainly determined by the gas volume, vacuum degree or exhaust pressure required for its operation. When pumping, the following two aspects should be paid attention to:
1. As far as possible, it is required to operate in the high efficiency area, that is, in the critical vacuum or critical exhaust pressure area.
2. Avoid operating near the maximum vacuum or exhaust pressure. Operating in this area, not only the efficiency is very low, but also the work is very unstable, easy to produce vibration and noise. For vacuum pumps with high vacuum, cavitation often occurs when they operate in this area. The obvious sign of this phenomenon is that there is noise and vibration in the pump. Cavitation will cause damage to pump body, impeller and other parts, so that the pump can not work.
According to the above principles, when the vacuum or gas pressure required by the pump is not high, it can be preferentially selected in the single-stage pump. If the vacuum or exhaust pressure is high, the single stage pump often can not meet the requirements, or, in the case of higher vacuum, the pump is required to still have a larger air volume, that is, the performance curve is required to be flat at higher vacuum, two stage pump can be selected. If the vacuum requirement is above -710mmHg, water ring-air pump or water ring-Roots vacuum unit can be selected as the vacuum pumping device.
2BV Series Liquid Ring Vacuum Pump
If it is only used as a vacuum pump, it is better to choose a single-acting pump. Because the single-acting pump is simple in structure, easy to manufacture and maintain, and has good cavitation resistance in high vacuum.
If it is used only for compressors with larger air volume, it is more appropriate to select double-acting pumps. Because the double-acting pump has large air volume, small volume and light weight, the radial force can be automatically balanced, the shaft is not easy to produce fatigue fracture, and the service life of the pump is longer.
Selection of liquid ring vacuum pump according to the required gas volume of the system
After preliminary selection of the type of liquid ring vacuum pump, for the vacuum pump, the type of pump should also be selected according to the volume of air required by the system.
If possible, kindly suggest please your working industry/process, working pressure, working medium, etc. Given detailed request helps to gain better-matched customized solution. Thanks for your patience.
your request will be responsed within 3 hours, kindly pay attention to your email please.
