High pressure water cooled roots blower

Roots blower is a high pressure roots blower when the pressure exceeds 58.8kpa. Generally, manufacturers recommend that users choose the fan with water cooling device structure. However, some customers will refuse to use the water-cooled fan because of inconvenient circulating water. When the pressure is 80 kPa and above 60 kPa, if the speed of the fan is not high, air cooling can be selected Double tank structure fan, but the bearing must purchase imported NSK and SKF brand bearings.

When the pressure exceeds 80kPa, the user must choose the fan with water cooling device. Do not be inconvenient on site or inconvenient in operation. In daily use, regularly check whether the gear oil of No. 220 of high-pressure water-cooled roots blower mixes with water and other pollutants and deteriorates. If it deteriorates, please replace it in time. Regularly check the components for oil leakage and leakage and repair them. If they cannot be repaired, please inform the manufacturer immediately. Be sure to check the operation status of the high pressure roots blower and motor.

If the noise and temperature are abnormal, please stop using. Check the air filter of Roots blower regularly for dirt. If it is dirty, please remove the air filter, screw off the wing nut, remove the cover, clean the filter sponge, and be careful not to throw the removed dirt into the mouth of Roots blower when removing the filter.

We should regularly maintain their own high pressure water-cooled roots blower, like the maintenance of their own car to maintain it, timely and regular replacement of Roots blower special oil, so that it can play its advantages, better service for you, reduce unnecessary expenses, if you purchase or technical guidance, please contact us at any time!