Pump manufacturers analyze reasons for the decline of the vacuum pump

Many users complained that after a long time using a vacuum pump, the vacuum degree and flow declined. Vacuum pump manufacturers answer these questions as a professional expert.

According to the vacuum pump manufacturers analysis,the pump chamber should be accumulated dust. However,if you want to be pumped 1 ml of clean water to rinse the dust chamber,It will not work. They need to maintenance.After the demolition of all the components to dry, re-assembly and each parts are back to normal. This shows that the pump can not have water to enter,otherwise the vacuum degree and flow rate will substantially decline.And it will show a very weak suction capacity from the appearance .

Vacuum pump manufacturers showed the vacuum degree decline is caused due to the accumulation of dust, but it can not arbitrarily clean with water and liquid water can also not enter into the vacuum pump,otherwise it will influence the life time of vacuum pump.

Contact us

If possible, kindly suggest please your working industry/process, working pressure, working medium, etc. Given detailed request helps to gain better-matched customized solution. Thanks for your patience.

your request will be responsed within 3 hours, kindly pay attention to your email please.

News

Polyester Chemical Fiber Steam Jet Vacuum Pump

Posted on Wed, 20 Jan 2021 06:42:14 +0000

Vacuum pump in paper industry of application

Posted on Thu, 14 Jan 2021 06:47:29 +0000

Vacuum pump and system in chemical and pharmaceutical industry

Posted on Wed, 13 Jan 2021 08:00:38 +0000

How to Operate and Maintain Liquid Ring Vacuum Pumps

Posted on Tue, 12 Jan 2021 05:23:24 +0000

Vacuum Pump In Pharmaceutical Industry

Posted on Mon, 11 Jan 2021 07:41:45 +0000

Vacuum system for secondary degassing process of molten steel

Posted on Fri, 08 Jan 2021 06:44:07 +0000