The oil diffusion pump is used for high vacuum and ultra-high vacuum to remove the gas in the high vacuum system that has no serious harm to the working liquid. This product is used in electronic industry, chemical industry, atomic energy industry, space simulation test.
Working principle of oil diffusion pump: after the prevacuum of about 10pa is pumped into the diffusion pump by the current stage pump, the working liquid with low saturated steam pressure at room temperature will be heated by the heater, and the oil steam generated will move upward along the steam pipe, and spew out at high speed through several stage nozzles, bringing the gas diffused in the oil steam to the front stage end. From the front pump out to the atmosphere, the oil vapor injection in the pump wall after cooling, and then flow back to the pump bottom, thus repeated work, so as to achieve the purpose of high vacuum.
1. High pumping speed;
2. Working pressure range: 10-2 ~ 10-5pa;
3. High vacuum can be obtained;
4. Simple structure, convenient operation and easy maintenance.
1. Electronics industry;
2. Chemical engineering;
Atomic energy industry; 3.
4. Space simulation test.
Product display
Item | KT-100 | KT-160 | KT-200 | KT-250 | KT-300 | KT-320 | KT-400 | KT-500 | |||||||
Ultimate pressure (Pa) | 5×10-5 | ||||||||||||||
Pumping Capacity (L/S) | 550 | 1800 | 2800 | 3500 | 4600 | 5000 | 8500 | 12000 | |||||||
Critical fore-pump pressure (Pa) | 40 | ||||||||||||||
Backflow rate mg/(cm2·min) | ≤3×10-2 | ||||||||||||||
Heating time ( min) | ≤30 | ≤35 | ≤40 | ≤45 | |||||||||||
Heating Power (kw) | 0.8-1 | 1.4-1.6 | 1.6-1.8 | 2.2-2.4 | 2.4-3 | 4~5 | 4~5 | 6~8 | |||||||
Electric Voltage (AC)V | 220 | 380 | |||||||||||||
Pump Oil Model | KS-3 | ||||||||||||||
Pump Oil Volume ( L) | 0.15 | 0.45 | 0.55 | 1-1.4 | 1-1.6 | 1.4-1.8 | 3~4 | 4 | |||||||
Cooling water consumption (L/H) | 180 | 250 | 300 | 350 | 400 | 420 | 500 | 600 | |||||||
Inlet dimension (mm) | 100 | 160 | 200 | 250 | 300 | 320 | 400 | 500 | |||||||
Outlet dimension (mm) | 32 | 50 | 65 | 65 | 80 | 80 | 100 | 100 | |||||||
Recommended forepump speed (L/s) | 4 | 8 | 15 | 15 | 30 | 30 | 70 | 150 | |||||||
Dimension (mm) |
L(Length) | 320 | 420 | 530 | 473 | 695 | 725 | 885 | 1010 | ||||||
B(Width) | 260 | 315 | 390 | 450 | 505 | 525 | 665 | 815 | |||||||
H(Height) | 365 | 505 | 575 | 650 | 726 | 830 | 925 | 1165 | |||||||
Net weight (kg) | 14 | 31 | 39 | 48 | 89 | 100 | 175 | 185 |
Performance curve
Installation dimensions
The price of the two oil diffusion pump is based on performance and flow rate. If you want to know the detailed price, please contact us or send an email to contact@evpvacuum.com.
(The article comes from the Internet. If reprinting is not allowed, please contact our company to delete it.)
If possible, kindly suggest please your working industry/process, working pressure, working medium, etc. Given detailed request helps to gain better-matched customized solution. Thanks for your patience.
your request will be responsed within 3 hours, kindly pay attention to your email please.