Single-pole rotary vacuum pump principles operation

Single-pole rotary vacuum pump is a novel and well-planned single-pole rotary vacuum pump, which can operate at the inlet pressure.

Brief introduction of single-pole rotary vacuum pump:

1. Oil mist eliminator is installed inside the pump, which can effectively eliminate the oil mist in the gas discharged by the pump and avoid the pollution of the surrounding environment caused by the oil mist.

2. Installed with a check valve in the suction port of the pump, when the pump is interrupted, the check valve and the hole specially arranged in the pump can isolate the pump and the pumped system immediately, avoid the pump oil returning to the pumped system, and together adhere to the true width of the pumped container, so the use of this type of vacuum pump can be no longer equipped with discharge. The vacuum cut-off valve of the gas can then reduce the user’s use cost.

3. The pump is equipped with an oil-gas separator, which together with an oil mist eliminator forms a useful silencing system to eliminate exhaust noise and avoid noise pollution.

4. Pump and motor directly connected equipment, choose air cooling, do not need water cooling pipes, so this model is a compact planning, simple equipment.

5.plan description is reasonable, vibration is small, no foundation bolts can be operated.

Advantages of single-pole rotary vacuum pump:

1. Small size, light weight and low noise.
2, equipped with gas valve, can remove a small amount of water vapor.
3. Limit vacuum is high.
4, built in compulsory oil pump, fully lubricated, reliable performance.
5, equipped with automatic anti oil check valve, double safety device, easy to start.
6, keep the intake pressure is less than 1.33*1000Pa, can continue to run.
7, no oil leakage, no oil, no pollution of the working environment.
8, can be equipped with small aperture conversion interface, KF interface. The 2XZ-C series vacuum pump is reformed on the basis of the original 2XZ series by drawing on and absorbing foreign advanced technology and experience. It can still run continuously when the inlet pressure is less than 1.33*1000Pa with forced oil intake. It is used to remove the gas in the sealed container and make the container vacuum. It can also be used as a front pump for all kinds of high vacuum and ultra high vacuum equipment.

2XZ Rotary Vane Vacuum Pump

The working principle of single-pole rotary vacuum pump is as follows:

Single-pole rotary vacuum pump is a volumetric pump. It sucks and compresses the gas in the pump cavity by means of the continuous operation of the rotary vane, and finally discharges from the exhaust port. The pump is mainly composed of stator, rotor, rotary vane and so on. The rotor is eccentrically loaded into the stator cavity. There are two rotary plates in the rotor slot, and the rotary spring is placed between the two rotary plates. The intake and exhaust ports on the stator are separated into two parts by the rotor and the rotary vane. When the rotor rotates in the stator cavity, the end of the rotor blade slides close to the inner wall of the pump cavity under the combined action of the spring tension and the centrifugal force of the rotor blade itself, periodically expands the volume of the cavisty on the inlet side and inhales the gas, gradually reduces the volume of the exhaust port, compresses the inhaled gas, and then discharges it from the exhaust port. The purpose of pumping is achieved.

Application of single-pole rotary vacuum pump:

Vacuum packaging of various foods, vacuum suction molding of rubber and plastics industries, paper transportation of printing industries, vacuum impregnation leak proof of various castings, vacuum clamps, vacuum monotony, vacuum filtration, vacuum power test and vacuum suction in hospital operating rooms are all true in the vacuum range that this type of pump can reach. Empty disposal.

Contact us

If possible, kindly suggest please your working industry/process, working pressure, working medium, etc. Given detailed request helps to gain better-matched customized solution. Thanks for your patience.

your request will be responsed within 3 hours, kindly pay attention to your email please.

News

dry screw vacuum pump in wood processing industry

Posted on Tue, 01 Feb 2022 07:02:47 +0000

Explosion proof and high temperature resistant vacuum unit

Posted on Wed, 10 Nov 2021 07:30:11 +0000

vacuum pumps for chemical industry has high requirements

Posted on Mon, 08 Nov 2021 08:52:52 +0000

What are the applications of roots vacuum units in medicine?

Posted on Wed, 03 Nov 2021 07:57:18 +0000

The advantages of dry screw vacuum pumps make up for the disadvantages of oil-sealed vacuum pumps

Posted on Tue, 02 Nov 2021 09:05:35 +0000

dry vacuum pump for measures to avoid oil return

Posted on Thu, 28 Oct 2021 09:03:25 +0000