Single-stage rotary vane vacuum pump is also called XD rotary vane vacuum pump. Rotary vane vacuum pumps are single-stage oil seal vane vacuum pumps, is the basic equipment to obtain vacuum. The suction port of rotary vane vacuum pump is equipped with a thick filter with wire mesh. Can prevent solid foreign dust particles from inhaling into the pump cavity. The oil separator is equipped with an exhaust transitional device with high efficiency oil and gas separation effect.
When the pump is stopped, the suction valve inside the suction port isolates the pump from the pumping system, preventing the return of vacuum pump oil into the pumping system. The pump is cooled by air. rotary vane vacuum pump all pumps are driven by a directly connected motor through an elastic coupling.
So what are the applicable scope of single-stage rotary vane vacuum pump：
1. Rotary vane vacuum pump is applicable to the vacuum extraction of the closed system. Such as vacuum packaging, vacuum forming, vacuum suction.
2. Inlet pressure range: 100Pa~ 100,000pa, beyond which, oil mist will be generated at the exhaust port of the vacuum pump. Rotary vane vacuum pump working environment temperature and suction gas temperature should be between 5 ℃ and 40 ℃.
3. Rotary vane vacuum pump cannot remove water or other liquids. Do not remove explosive, inflammable, excessive oxygen content, corrosive gas.
4. The motors provided in general are not explosion-proof. If the motors are required to be explosion-proof or other special requirements, they must meet relevant standards.
If possible, kindly suggest please your working industry/process, working pressure, working medium, etc. Given detailed request helps to gain better-matched customized solution. Thanks for your patience.
your request will be responsed within 3 hours, kindly pay attention to your email please.
