The helium mass spectrometer leak detector has shown excellent performance in the field of leak detection and is now widely used in military, medical and other industries. Today, we will talk about its application in automobiles and see how it can be used to detect aluminum alloy wheels.
Firstly, send the aluminum alloy wheels that require leak detection to the designated position, then center them and use a lifting and rotating mechanical arm to grab them onto the detection platform, waiting for detection.
When the helium mass spectrometer leak detector detects a workpiece, it will automatically close the sealing cover and seal the top and bottom of the wheel.
Under the suction force of the vacuum pump, the one-way valve connected to the vacuum pump will receive a signal and automatically open to vacuum the inner and outer chambers. If there are leaks in the workpiece, helium molecules will enter the helium mass spectrometer for analysis through a one-way valve. After the one-way valve is opened for a period of time, it will close to prevent air from entering the helium mass spectrometer.
Finally, the system will compare the final value of the analyzer with the set value of the equipment to determine whether the quality of the aluminum alloy wheels meets the standard.
So the above is the relevant introduction to the steps of using a helium mass spectrometer leak detector to detect aluminum alloy wheels, hoping to be helpful to everyone~
(The article comes from the Internet. If reprinting is not allowed, please contact our company to delete it.)If possible, kindly suggest please your working industry/process, working pressure, working medium, etc. Given detailed request helps to gain better-matched customized solution. Thanks for your patience.
your request will be responsed within 3 hours, kindly pay attention to your email please.
