As the name suggests, the working fluid of the water ring vacuum pump unit is a kind of liquid required by the vacuum pump equipment during operation. It can make the operation of the equipment more stable and reduce the wear of internal parts of the equipment. Therefore, the working fluid is very important for the equipment.
Therefore, you must operate correctly when adding working fluid to the equipment, otherwise it will only be counterproductive in case of wrong use. Then the following small series will talk about the precautions for the use of the working fluid, hoping to help you.
1. When the working fluid is recycled, it can only be kept free of impurities, and it needs to be matched with the water tank; When cooling the general working water temperature, it is recommended to be 15-25 ℃, because if the water temperature is too high, it will affect the performance of the water ring vacuum pump unit, such as vacuum degree, air extraction, etc.
2. For general equipment cooling, it is more important to regulate the on-site process and temperature. In fact, most industries use circulating water repeatedly, because it reduces the waste of resources to a certain extent. As long as it is water, it can be used, but its circulating pipeline must be installed; Generally, the working fluid of the water ring vacuum pump unit is preferably industrial soft water.
3. When the unit is working, it has certain requirements for water temperature and water quality in order to avoid corrosion of internal impeller and other components and whether the vacuum produced is pure. Generally speaking, the unit uses water circularly, which can save resources.
4. Industrial soft water should be selected as far as possible to avoid damage to the water ring vacuum pump unit, and it can better use water for many times to achieve the purpose of environmental protection and resource conservation.
Therefore, when adding or changing the working fluid in the feed ring vacuum pump unit, we must pay attention to the contents mentioned in the above small series, and operate according to the correct methods and steps. At the same time, after adding or replacing the working fluid to the equipment, it is necessary to conduct a trial run first to ensure that the equipment can be officially used after normal operation, so as to avoid the failure of the equipment due to the wrong addition of working fluid.
If possible, kindly suggest please your working industry/process, working pressure, working medium, etc. Given detailed request helps to gain better-matched customized solution. Thanks for your patience.
your request will be responsed within 3 hours, kindly pay attention to your email please.
