2BV water ring vacuum pump energy-saving technology
2BV water ring vacuum pump as a vacuum pump, is widely used in construction, chemical industry, machinery, etc, in the process of using, may appear the phenomenon of excessive energy consumption, how do we let the energy loss to reduce some? Let’s take a look.
Energy-saving skills of water ring vacuum pump:
1. Change the opening ring and adjust the axial clearance. To prevent improper clearance of impeller mouth ring and axial clearance, it should be adjusted according to factory instructions of 2BV water ring vacuum pump.
2. The filter screen can be removed if it can be kept clean.
3. 2BV water ring type vacuum pump is installed in an oblique way to reduce the elbow. Tilt the vacuum pump or the volute so that the outlet is facing the sink.
4. Shorten the pipeline. Remove 1 meter steel tube, 10 hours can save diesel 0.21 kg.
5. Expand the outlet pipe diameter. Replace the 4 meter long 10 cm water outlet hose with 15 cm hose and save 0.5 kg of diesel oil in 10 hours.
6. Timely eliminate the pipe plug. Foreign matter in the inlet pipe, impeller or guide shell runner will reduce the water output.
From what has been discussed above, it is about 2 bv water ring vacuum pump energy saving technique of simple introduction, the above content can not only reduce energy consumption, reduce cost, also can improve the efficiency of the use of the equipment, prolong service life.
(The article comes from the Internet. If reprinting is not allowed, please contact our company to delete it.)