Cleaning of water ring vacuum pump

Water ring vacuum pump in the long use of the presence of some stains in its appearance or internal residue, in order to ensure the cleanliness of the equipment, we need to carry out some unscheduled cleaning. Avoid excessive use of vacuum pumps.

The cleaning steps of the water ring vacuum pump:

1. the water ring vacuum pump uses one month to clean the foreign objects gathered in the cavity of the pump, for example, it can open the valve on the drain line for a short time or open the emptying in a short time.

2. if the water ring vacuum pump has excessive accumulation of scale in the work, then the water ring vacuum pump should be washed once every other time (generally 5~10 days), and the washing time is flushed with a suitable solvent (10% oxalic acid, alcohol, etc.) and then rinsed with water.

3. All filters and filters installed on the pipeline must also be cleaned or replaced periodically (once a month).

4. The next cleaning cycle must be determined according to the scaling in the exhaust chamber of the water ring vacuum pump in the first inspection process or the blockage of filter net filter on the pipe.

5. When the water ring vacuum pump is cleaned with compressed gas, the personal protective equipment (such as the wind mirror, the mask and so on) must be worn and the discharge gas is discharged from the pipe. When using chemical cleaning materials, attention must be paid to warnings and guidance in relevant safety materials. Chemical substances must be compatible with the materials used. It should be noted that chemical substances may corrode parts in the pump.

In the process of cleaning water-ring vacuum pump, it is necessary to choose the suitable cleaning agent, and the cleaning methods of different stains will be different. In ordinary use, we should also pay attention to the cleanliness of the equipment. Too much stains will affect the use of the equipment.