To avoid the overload of vacuum pump

Posted on Thu, 16 Aug 2018 10:20:01 +0000

Overload refers to exceeding the specified carrying standard, that is, exceeding the rated load of the equipment itself. The general phenomenon is that the current become large, the electrical equipment temperature become higher, and the long-term overload of the line will reduce the line insulat...

+ Continue reading

How the split casing pump work?

Posted on Fri, 03 Aug 2018 08:48:38 +0000

The fluid should be filled in the casing before the pump work. The impeller will be rotated by the bearing with high speed. The fluid in the casing will be rotated at the same time.The fluid will absorb the energy when it be throw from the center of the impeller to the outside within the centrifu...

+ Continue reading

Instructions of using cooling tower and ling condenser of water ring vacuum pump

Posted on Tue, 22 May 2018 09:56:51 +0000

As it known to all, water ring vacuum pump in the general case use water as working fluid, in the process of water into the discharge to achieve the purpose of pumping air into vacuum state, and in the process of water absorption into sent by the pumping action of the water hitting the wall, impe...

+ Continue reading

Screw Vacuum Pumps

Posted on Tue, 22 May 2018 09:54:47 +0000

When developing modern screw vacuum pumps the reduction of energy consumption has been given a high focus— it is now at about the same level of established oil-sealed rotary vane pumps or rotary piston pumps. To energy savings through modern screw vacuum pumps, similar opportunities arise when us...

+ Continue reading

The removal of vacuum pump and installation sequence

Posted on Tue, 22 May 2018 09:51:23 +0000

1. Open cylinder and installation (1) Before dismantling the cylinder. Discharge oil from the vacuum pump (including liquid ring pump, rotary vane pump , rotary piston pump ,oil diffusion pump, dry scroll pump and so on ) Manually rotate the fan belt, discharge may have been gathered in the vacuu...

+ Continue reading

How to deal with common vacuum pump failure

Posted on Tue, 22 May 2018 09:48:03 +0000

Generally,the following major common problems will occurs while in vauum pump using: 1. vacuum pressure decreased; 2. high noise; 3.pump oil injecting; 4.oil leakage; 5.massive smoke from pump oil; 6.vacuum pump , such as rotary vane vacuum pump , rotary piston vacuum pump , dry scroll vacuum pum...

+ Continue reading

The function and principle of gas ballast valve

Posted on Tue, 22 May 2018 09:44:18 +0000

Due to contain a certain amount of water vapor in the atmosphere, so when the vacuum  pump working the suction air also contain some non-condensable gas and the mixture of permanent gas.This gas mixture is compressed within the pump exhaust process, if partial pressure of non-condensable gas pass...

+ Continue reading

What is the working principle of dry running rotary vane vacuum pump

Posted on Tue, 22 May 2018 09:43:22 +0000

Oil free dry vacuum pump (also referred to as dry mechanical pump) refers to the pump can began under atmospheric pressure extraction, but also will be pumping gas directly into the atmosphere, the pump cavity without oil or other work medium, and the ultimate pressure of the pump and oil seal ty...

+ Continue reading

The influence of the working efficiency of the vacuum pump

Posted on Tue, 22 May 2018 09:42:40 +0000

With the rapid development of economy in our country, the vacuum pump industry in our country have also maintained the momentum of rapid growth, and realize the steady and continuous development. In its rapid development at the same time, the vacuum pump companies and users are constantly explore...

+ Continue reading

Water ring vacuum pump maintenance

Posted on Tue, 22 May 2018 09:41:45 +0000

1, To bearing the body on a regular basis to join bearing lubrication oil or butter. 2, When using the water ring vacuum pump, screw vacuum pump under the first diversion screw pump body, filling water diversion.Especially for mechanical seal water ring vacuum pump (2 bv, 2 be) to start the motor...

+ Continue reading