Roots blower for desulfurization and denitrification

Is the roots blower used for desulfurization and denitrification? Many are used. Roots blower used in the production of desulfurization and denitrification of neutral energy is relatively stable, the wind fluctuation is not big, the pressure is enough, the price is also cheap.

Roots blower for desulfurization and Denitrification features:

1. The constant volume fan has no internal compression, and the conveying gas is mandatory. With the change of pressure, the flow rate changes little.

2. The product adopts three blade linear impeller, with smooth inlet and exhaust pulsation and low noise.

3. The impeller adopts special curve to make the meshing more reasonable, the leakage is small, the efficiency is high and the energy consumption is low.

4. The product adopts a variety of new structure design, which makes the whole machine compact in structure, small in size, light in weight and beautiful in appearance.

5. The product adopts high precision hard tooth surface synchronous gear, with long service life and low noise.No dust, clean air.

Before starting the machine, the manual exhaust valve of Roots blower for desulfurization and denitrification shall be opened to prevent the impact on the fan. Please close the exhaust valve before shutting down. Then press again, which can be used in normal operation to extend the life of the fan.

The roots blower for desulfurization and dedusting is running to avoid the impurity particles in the air. The rotary fan must be equipped with an air filter to prevent the abrasion of the suction parts. However, a large number of impurities will be precipitated after the roots blower uses the cleaning filter for a period of time, which will lead to the reduction of fan pressure and flow rate. Then you need to slice timely in order to continue to use the cleaning filter.

Desulfurization roots blower failure, need to stop maintenance or buy a new machine, then need professional technical personnel to assemble it. Some people think that it may be easy to install and assemble them according to the instructions. I hope the above introduction can help you.