Roots Blower for Shipping Industry

Product details

Roots Blower for Shipping Industry

 

Model Bore Speed         rpm Pumping speed and shaft power at different pressure
3000mmH2O 4000mmH2O 5000mmH2O 6000mmH2O
m3/min Kw m3/min Kw m3/min Kw m3/min Kw
SSR-50 DN50 1100 0.99 0.78 0.9 1.04 0.78 1.32
1230 1.14 0.92 1.05 1.2 0.94 1.49
1350 1.28 1.04 1.19 1.34 1.09 1.65
1450 1.4 1.14 1.3 1.47 1.2 1.79 1.14 2.15
1530 1.49 1.24 1.39 1.58 1.3 1.92 1.24 2.29
1640 1.62 1.37 1.52 1.74 1.43 2.1 1.38 2.49
1730 1.73 1.48 1.62 1.86 1.53 2.25 1.48 2.66
1840 1.86 1.62 1.75 2.02 1.67 2.43 1.62 2.86
1950 1.99 1.75 1.88 2.18 1.81 2.61 1.75 3.06
2120 2.19 1.96 2.08 2.42 2.01 2.89 1.96 3.37
SSR-65 DN65 1110 1.32 1.16 1.18 1.52 1.07 1.82
1240 1.58 1.33 1.44 1.74 1.32 2.1
1360 1.82 1.48 1.68 1.94 1.56 2.35
1450 2 1.6 1.86 2.1 1.74 2.54 1.63 3
1530 2.14 1.72 2.02 2.25 1.9 2.72 1.79 3.2
1640 2.36 1.89 2.24 2.46 2.12 2.95 2.01 3.46
1740 2.56 2.04 2.44 2.64 2.32 3.16 2.21 3.7
1820 2.72 2.16 2.6 2.79 2.48 3.33 2.37 3.9
1940 2.96 2.35 2.83 3.02 2.71 3.59 2.61 4.2
2130 3.33 2.65 3.21 3.35 3.09 4 2.99 4.66
SSR-80 DN80 1140 2.78 2.14 2.63 2.69 2.48 3.22 2.36 3.74
1230 3.06 2.35 2.91 2.94 2.76 3.53 2.63 4.11
1300 3.27 2.51 3.12 3.14 2.97 3.77 2.84 4.41
1360 3.46 2.64 3.3 3.31 3.16 3.98 3.02 4.65
1460 3.76 2.87 3.62 3.6 3.46 4.32 3.34 5.06
1560 4.07 3.1 3.93 3.88 3.77 4.66 3.65 5.48
1650 4.36 3.31 4.2 4.14 4.05 4.98 3.92 5.85
1730 4.6 3.5 4.46 4.36 4.3 5.26 4.15 6.18
1820 4.88 3.7 4.74 4.62 4.58 5.57 4.45 6.56
1900 5.12 3.88 4.99 4.86 4.82 5.84 4.7 6.88
SSR-100 DN100 1060 3.95 3.1 3.7 4 3.48 4.95 3.28 5.86
1140 4.36 3.41 4.12 4.38 3.9 5.38 3.71 6.38
1220 4.76 3.71 4.53 4.76 4.32 5.76 4.13 6.9
1310 5.18 4.05 4.95 5.18 4.74 6.3 4.55 7.48
1460 6 4.62 5.78 5.87 5.58 7.1 5.39 8.45
1540 6.4 4.98 6.19 6.3 5.99 7.61 5.81 9
1680 7.13 5.62 6.92 7.08 6.73 8.5 6.55 10
1780 7.62 6.1 7.42 7.63 7.23 9.15 7.06 10.7
1880 8.15 6.55 7.95 8.18 7.77 9.8 7.6 11.42
1980 8.65 7.01 8.46 8.75 8.28 10.45 8.12 12.13
SSR-125 DN125 980 5.95 4.1 5.75 5.4 5.55 6.7 5.37 8.05
1050 6.42 4.53 6.22 5.95 6.03 7.3 5.85 8.75
1200 7.45 5.5 7.25 7.1 7 8.65 6.9 10.25
1310 8.19 6.2 8 7.9 7.82 9.65 7.64 11.4
1390 8.74 6.7 8.54 8.5 8.37 10.35 8.2 12.2
1450 9.15 7.1 8.95 9 8.77 10.9 8.6 12.8
1530 9.7 7.65 9.5 9.6 9.33 11.6 9.15 13.6
1630 10.37 8.35 10.17 10.35 10 12.4 9.85 14.6
1750 11.18 9.18 10.99 11.26 10.83 13.38 10.66 15.8
1850 11.85 9.88 11.66 12.02 11.5 14.2 11.34 16.85
SSR-150 DN150 810 11.15 8.5 10.86 10.8 10.65 13.2 10.39 15.6
860 12.03 9.3 11.75 11.7 11.54 14.25 11.27 16.8
970 13.95 11.05 13.7 13.8 13.5 16.6 13.23 19.4
1110 16.37 13.1 16.15 16.5 15.95 19.6 15.7 22.8
1180 17.59 14.4 17.37 17.8 17.17 21.1 16.97 24.4
1240 18.63 15.4 18.43 18.9 18.23 22.4 18.03 25.8
1400 21.4 17.9 21.2 21.9 21.05 25.8 20.87 29.7
1520 23.4 20.15 23.21 24.6 23.04 28.9 22.82 33.3
1620 24.86 22.6 24.68 27.4 24.48 32.05 24.27 36.9
1730 26.48 25.3 26.27 30.4 26.08 35.55 25.87 40.8
SSR-175 DN200 970 20.33 15.33 19.8 19.42 19.35 23.56 18.85 27.7
1110 23.94 18.05 23.44 23 22.98 27.62 22.51 32.35
1180 25.76 19.71 25.25 24.73 24.98 29.65 24.37 34.57
1240 27.3 21 26.82 26.21 26.37 31.41 25.94 36.51
1400 31.43 24.28 30.95 30.21 30.54 35.02 30.14 41.84
1520 34.45 27.14 33.98 33.7 33.55 40.09 33.11 46.59
1620 36.76 30.17 36.29 37.22 35.84 44.1 35.4 51.21
1730 39.31 33.5 38.82 41 38.38 48.55 37.94 56.22
SSR-200 DN200 810 29.55 20.68 28.89 26.94 28.22 33.16 27.63 39.05
900 33.66 24 33.05 30.93 32.34 37.83 31.71 44.38
980 37.34 27.18 36.77 34.55 36.03 42.02 35.34 49.38
1070 41.44 30.13 40.97 38.68 40.15 46.82 39.42 54.95
1150 45.07 32.7 44.6 42.02 43.78 50.98 43.06 59.74
1230 48.22 36.26 47.78 46.08 47.08 55.53 46.44 64.8
1310 51.38 39.66 50.99 50.18 50.4 59.96 49.83 69.72
1390 54.49 42.92 54.16 54.22 53.68 64.48 53.24 74.6
1480 58.02 46.58 57.76 58.19 57.37 68.98 57.08 80.18

 

Roots blower features:

1. Because the impeller runs in the body without friction, it does not need lubrication, so that the exhausted gas does not contain oil. It is an ideal pneumatic conveying gas source for chemical and food industries.
2. Roots blower is a volume-operated blower. When used, the flow rate changes little with the change of pressure. But the flow rate varies with the speed. Therefore, the selection range of pressure is very wide, and the selection of flow rate can be achieved by choosing rotating speed.
3. Roots blower has high speed, small clearance between rotor and rotor, rotor and body, which leads to less leakage and higher volume efficiency. Our factory has strong processing and assembly technology, which can ensure the reasonable and uniform clearance, not only achieve higher volumetric efficiency, but also avoid friction due to thermal expansion in the body.
4. The structure of Roots blower determines that its mechanical friction loss is very small. Because only bearings and gear pairs have mechanical contact in the selection of materials, the rotor, casing and gear ring have enough mechanical strength. Safe operation and long service life are the main features of Roots blower products in our factory.
5. The rotor of Roots blower in our factory has been checked by static and dynamic balance. The finished product runs smoothly with minimal vibration.

Roots Blower Structure:

Rotor: It consists of shaft, impeller, bearing, synchronous gear, coupling, sleeve, etc.
Impeller: Involute profile is selected, and the volume utilization ratio is high.
Bearing: 3000 type double row centripetal spherical roller bearing is selected as the positioning end of the near coupling. 32000 single-row centripetal short cylindrical roller bearings are selected as free ends to adapt to the axial displacement of the rotor during hot heave expansion.
Synchronization gear: It is composed of gear ring and hub, which is convenient to adjust the clearance of impeller.
Body: It is composed of shell and left and right wallboard. Left and right wall panels, bearing seats and sealing parts installed in left and right wall panels can be used for each other.
Base: Small and medium-sized blowers are equipped with a common base. Large blowers are only equipped with a blower base, which is convenient for installation and commissioning.
Lubrication: Gears are submerged and bearings are spatter lubricated. Good lubrication effect, safe and reliable.
Driving mode: direct coupling is the main driving mode. If the performance specifications require, triangular pulley can also be used for speed change. Elastic coupling is selected for coupling, which can mitigate impact and compensate a small amount of axis deviation. In addition to motor as driving machine, large flow blower can also use steam turbine or other driving machine.

EVP Vacuum Pump Co., Ltd. will provide you with detailed product price, product pictures and other product information about ship blower Roots blower, fresh aquaculture oxygen-increasing blower, industrial dust cleaning blower, etc. To know more about our product information and price, send email to contact@evpvacuum.com.

(The article comes from the Internet. If reprinting is not allowed, please contact our company to delete it.)

Contact us

If possible, kindly suggest please your working industry/process, working pressure, working medium, etc. Given detailed request helps to gain better-matched customized solution. Thanks for your patience.

your request will be responsed within 3 hours, kindly pay attention to your email please.

News

dry screw vacuum pump in wood processing industry

Posted on Tue, 01 Feb 2022 07:02:47 +0000

Explosion proof and high temperature resistant vacuum unit

Posted on Wed, 10 Nov 2021 07:30:11 +0000

vacuum pumps for chemical industry has high requirements

Posted on Mon, 08 Nov 2021 08:52:52 +0000

What are the applications of roots vacuum units in medicine?

Posted on Wed, 03 Nov 2021 07:57:18 +0000

The advantages of dry screw vacuum pumps make up for the disadvantages of oil-sealed vacuum pumps

Posted on Tue, 02 Nov 2021 09:05:35 +0000

dry vacuum pump for measures to avoid oil return

Posted on Thu, 28 Oct 2021 09:03:25 +0000