Roots blower of assembly sequence

The roots blower separates the air inlet and outlet from each other by means of meshing with two impellers. The air model fan moves the gas in the cylinder volume from the inlet to the outlet without internal pressure during the rotation, so as to achieve the purpose of forced exhaust. Roots blower must be assembled before use, so as to ensure its normal operation. Therefore, it requires us to master its assembly sequence during operation, so that it can be used well. What is the assembly sequence of Roots blower?

How to assemble roots blower? Before assembling roots blower equipment, repair or replace the damaged parts, clean all precision parts to keep the parts clean, check whether the sealing gasket of each part of the fan is damaged or lost, and replace the fan gasket with the same thickness and material regularly. How to assemble roots blower is as follows:

1. Install the assembled head of Roots blower on one side of the base, fasten it with bolts, and install the motor on the other side of the base. After installation, fasten the bolts, and do not fasten and lock them immediately;

2. Lift the fan casing to the assembly workbench, clean it and repair the burr;

3. Install the wallboard at the drive end of Roots blower on the casing;

4. Push the fan rotor part into the roots blower housing from the other end;

5. Assemble the side wall panel of the gear end of the blower: ensure that the axial total clearance of Roots blower is appropriate, and when the total clearance is not enough, add a certain shell sealing gasket;

6. Assemble the bearing blocks and bearings on both sides of Roots blower to ensure that the axial distribution clearance of impeller is appropriate;

7. Assemble the gear part of Roots blower, install the oil slinger, and check the factory mark. The cone surface of gear shall not be coated with lubricating oil, but shall be cleaned;

8. Assemble the gear box of Roots blower, so far, the assembly of Roots blower is completed.

The above is about the roots blower assembly sequence, I hope it can help you. Our company’s roots blower is loved by the majority of users, if you need, you can contact us at any time!