The contrast between dry screw vacuum pump and rotary piston vacuum pump

Due to the space simulation device has a volume of the pumping container from thousand cubic meters to tens of thousands of cubic meters, the vacuum pressure changes from from tens of thousands of Pascal to several Pascal, and the pumped gas contains a large amount of water vapor or a part of nitrogen oxides, so The first problem encountered with this vacuum system is the pre-vacuum problem. If selected the rotary piston vacuum pump as the backing pump, it may exist some problems as below listed:

Firstly, the slide valve pump runs for a long time under high inlet pressure. Due to the air carrying effect, the fuel injection phenomenon is very serious. One is to waste a lot of expensive oil, and the other is to pollute the environment;

Since the pumped gas contains a large amount of water vapor or nitrogen oxides, once the gas enters the pump, the vacuum pump oil will be rapidly emulsified and deteriorated, and the sealing property of the oil will be destroyed, resulting in a decrease in vacuum performance and even destruction of the pump;

dry screw vacuum pump

LG Series Screw Vacuum Pump

It may need more pumps and the vibration and noise of the rotary piston vacuum pump are also large;

The dry screw vacuum pump produced by Shanghai EVP Vacuum Technology Co., Ltd. has become the first choice for large-scale space simulation vacuum system due to its advantages of clean and oil-free, large pumping speed, low vibration and low noise. In addition, in order to increase the pumping speed and ultimate vacuum of the vacuum unit and correspondingly reduce the size of the screw pump, a two-stage unit or two Roots pumps in series with a screw vacuum pump and a screw vacuum pump are generally connected in series. The three-stage unit is composed. To prevent particulate impurities from entering the pump, an inlet filter is placed at the inlet of the vacuum unit with an accuracy of 50 μm.

tags: Rotary piston vacuum pump, dry screw vacuum pump
Edited by Catherine Qin / EVP Vacuum Solution

Contact us

If possible, kindly suggest please your working industry/process, working pressure, working medium, etc. Given detailed request helps to gain better-matched customized solution. Thanks for your patience.

your request will be responsed within 3 hours, kindly pay attention to your email please.


vacuum system in hydrocarbon industry of application

Posted on Thu, 14 Oct 2021 08:54:33 +0000

roots vacuum pump of vacuum water diversion steps

Posted on Sat, 09 Oct 2021 08:10:26 +0000

Roots screw dry vacuum unit in practical application of performance

Posted on Fri, 08 Oct 2021 02:57:09 +0000

Vacuum Pump System for Vacuum Distillation Purification Equipment

Posted on Thu, 07 Oct 2021 02:57:03 +0000

What conditions is the vacuum pump used?

Posted on Wed, 06 Oct 2021 02:54:49 +0000

Under what circumstances do I need to install additional devices for the vacuum pump?

Posted on Tue, 05 Oct 2021 02:14:15 +0000