Oil mist filter is also called vacuum pump exhaust filter element. What is the function of vacuum pump exhaust filter element? What’s the use? Since it is an exhaust filter element, it must be installed at the exhaust port. That is to say, the main function of exhaust filter element is to separate oil and gas!
When the vacuum pump is running, the gas is sucked into the cylinder body, and enters the oil tank through the rotation of the rotor and blades. At the same time, the oil and gas are also discharged into the tank through the cylinder block. After the oil and gas enter the oil tank, they are separated by the oil mist separator of the vacuum pump accessories, and the gas is discharged from the oil tank, and the oil precipitates and continues to flow back! Because the gas and oil are into the oil mist separator, under the effect of pressure, the gas is slowly discharged from the outside. Therefore, for the vacuum pump accessories oil mist separator / exhaust filter filter paper requirements are quite high, once the filter paper failure, the vacuum pump will appear fuel injection, smoke and other phenomena!
Some manufacturers may produce some waste gas in the production process, which will cause environmental pollution, which will attract the attention of relevant departments. With the development of science and technology, the filter is also constantly improving. Installing some filters on the machine can effectively reduce the generation of waste gas. It is not only a corporate social responsibility, but also a way to win public praise and reduce public opinion on pollution. So how to choose the oil mist filter of vacuum pump in stainless steel factory? Now EVP vacuum pump manufacturers for you to introduce it!
The selection of vacuum pump filter should first determine the type and components of vacuum pump for the application. For example, what we need to use in vacuum coating of stainless steel factory is the oil mist filter of vacuum pump. The correct filter type can be selected for further selection of filter type.
In a stainless steel material factory, there are dozens of BSV vacuum pumps. During vacuum coating, smoke is serious and a large amount of oil is injected, which pollutes the environment and wastes oil. Under these circumstances, after consulting many parties, stainless steel material factory learned about the oil mist filter of vacuum pump from an old customer. After we have a detailed understanding of the situation of stainless steel material factory, we choose to use oil mist filter for stainless steel material factory. Oil mist filter is suitable for slide valve vacuum pump or rotary vane vacuum pump with pumping rate of 70 L / s. It can be used for different brands of vacuum pumps. The oil mist filter can solve the environmental pollution and oil volatilization loss caused by smoke and oil injection of vacuum pump in stainless steel plant through high-efficiency oil gas separation, so as to achieve the purpose of energy conservation and environmental protection.
Finally, we have installed oil mist filters for dozens of BSV vacuum pumps in this stainless steel factory, so customers will no longer worry about the problem of soot emission.
If possible, kindly suggest please your working industry/process, working pressure, working medium, etc. Given detailed request helps to gain better-matched customized solution. Thanks for your patience.
your request will be responsed within 3 hours, kindly pay attention to your email please.
