rotary vane vacuum pump in manipulator industry

The application of rotary vane vacuum pump in robot industry uses the working principle of vacuum suction, vacuum cleaning treatment and adsorption. It is not only used in packaging machine, injection molding machine, machine tool, etc., but also used in automobile industry, automatic control, printing machinery, packaging machinery, etc. Water purification treatment, analytical instruments, equipment maintenance, biopharmaceutical, communication electronics, etc. are the choices of vacuum space that needs pure environmental protection in industrialized society. Robot can simulate some movement of human hand, and can perform the required tasks under a certain control program. It can replace the heavy or harmful work of human beings and realize the automation and mechanization of production.

rotary vane vacuum pump installation instructions:

1. Place the vacuum pump in a place with good ventilation, low dust and humidity as far as possible. The base is fixed with rubber shock absorber or spring.

2. Connect the air inlet to some specifications of joints and air filter muffler, connect the pipes; take out the air outlet or muffler.

3. The power supply used shall have enough capacity to confirm that the voltage used meets the product requirements.

4. Connect the power line and capacitor line according to the wiring requirements.

5. After checking that the vacuum pump components are normal, insert the power cord into the qualified power socket (the power socket must be well grounded), and the machine starts to work.

6. Adjust the pressure regulator so that the pressure gauge shows the required pressure and remains stable.

7. When the vacuum pump is not used, adjust the regulating valve to exhaust the air, and then cut off the power supply.

8. It is strictly prohibited to pull the lead wire at will to avoid damage or product failure.


rotary vane vacuum pump maintenance:

1. Clean the housing. When the power supply is cut off, please clean the dust and dirt on the outside of the shell with a dry soft cloth, and clean it at least once a month.

2. The cleaning of air filter muffler and silencing filter cotton is very important, which directly affects the flow and service life of vacuum pump. At least once a month, please screw off the muffler, remove the muffler end cover, take out the filter cotton, wash it with clean water, and then install it. If cleaning is not possible, replace the filter.

3. When using, tighten the fixing bolts of the base and shock absorption foot and place them in a well ventilated place.

4. When using the vacuum pump, do not contact any components on the machine.

5. This product is a robot vacuum pump, lubrication is strictly prohibited.

6. When the product is not used for a long time, please clean it and put it in a dry and ventilated place.

rotary vane vacuum pump precautions:

1. Correctly select the power supply and capacitor matching the product nameplate. When the power supply voltage is out of the use range or the voltage fluctuates greatly, please use the voltage regulator before use.

2. The ambient temperature of the product is – 10 to + 40 ° C, and the altitude is not more than 1500 meters. Over 1500 meters use plateau vacuum pump. When using, please place it in a ventilated and clean place as much as possible.

3. Use a suitable air filter muffler and clean or replace it regularly.

4. The medium used in this product is air.

5. When extending the power cord, please consider the voltage drop.

With the development of science and technology, the degree of industrial automation has been improved. In some respects, automatic and semi-automatic equipment are used for auxiliary operation, which saves workers from heavy labor. Among them, the application of rotary vane vacuum pump in the robot industry has the characteristics of simple operation, high efficiency, safety, accuracy, intuitive, which can meet the requirements of high efficiency, high quality, and high safety of modern enterprises. It plays an irreplaceable role.

Contact us

If possible, kindly suggest please your working industry/process, working pressure, working medium, etc. Given detailed request helps to gain better-matched customized solution. Thanks for your patience.

your request will be responsed within 3 hours, kindly pay attention to your email please.


dry screw vacuum pump in wood processing industry

Posted on Tue, 01 Feb 2022 07:02:47 +0000

Explosion proof and high temperature resistant vacuum unit

Posted on Wed, 10 Nov 2021 07:30:11 +0000

vacuum pumps for chemical industry has high requirements

Posted on Mon, 08 Nov 2021 08:52:52 +0000

What are the applications of roots vacuum units in medicine?

Posted on Wed, 03 Nov 2021 07:57:18 +0000

The advantages of dry screw vacuum pumps make up for the disadvantages of oil-sealed vacuum pumps

Posted on Tue, 02 Nov 2021 09:05:35 +0000

dry vacuum pump for measures to avoid oil return

Posted on Thu, 28 Oct 2021 09:03:25 +0000