What kind of vacuum pump should be used in the vacuum environmental waste liquid treatment system?
The waste liquid contains water, while the general mechanical pump will rust when encountering water, which will cause the vacuum pump to be stuck seriously. Therefore, the use of general mechanical pumps, such as rotary vane vacuum pump, slide valve vacuum pump, reciprocating vacuum pump and other vacuum pumps, is not suitable for suction in the “vacuum environmental protection waste liquid treatment system”, so water ring vacuum pump must be used comprehensively.
But what kind of water ring vacuum pump should be chosen? This is also particular. The water ring vacuum pump selected in the “vacuum environmental protection waste liquid treatment system” requires a high vacuum degree. The vacuum degree of the traditional series and water ring vacuum pump is not high, so it is not suitable.
At the same time, the working parameters, occupied position, maintenance and other conditions of the vacuum pump should be considered comprehensively, so it is most appropriate to choose 2BV series water ring vacuum pump, because the shaft and impeller of the 2BV series water ring vacuum pump are fixed by expanding sleeve, and because of the unique shunt design of its distribution plate, the efficiency is higher. Therefore, 2BV series water ring vacuum pump is the most suitable choice for “vacuum environmental protection waste liquid treatment system”.
vacuum environmental protection waste liquid treatment system features:
1. The system is modular and intelligent.
“Vacuum environmental protection waste liquid treatment system” integrates the water ring vacuum pump, integrated condenser, reaction kettle, heating device, cooling system and relevant pipelines into a modular platform, which can be directly assembled by customers and simplifies customer installation. At the same time, it realizes intelligent and one key control.
2. Lower height requirements, more convenient and safe.
The integrated condenser in the original generation of “vacuum environmental waste treatment system” needs to be placed at a height of more than 9.5m, while the second generation of “vacuum environmental waste treatment system” is now reduced to more than 5m, making the operation more convenient and safer.
3. The installation is easier and covers less area.
The installation of the original generation of “vacuum environmental wastewater treatment system” requires multi-step installation, while the second generation of “vacuum environmental wastewater treatment system” is simpler than the first generation of “vacuum environmental wastewater treatment system” with modular installation and less overall floor area.
4. Provide more specific basic operation parameters. The “vacuum environmental protection waste liquid treatment system” uses clear operation basic parameters, such as the pressure, flow, reactor temperature, etc. required by the steam used to ensure that the user purification waste liquid can reach a higher standard.
(The article comes from the Internet. If reprinting is not allowed, please contact our company to delete it.)If possible, kindly suggest please your working industry/process, working pressure, working medium, etc. Given detailed request helps to gain better-matched customized solution. Thanks for your patience.
your request will be responsed within 3 hours, kindly pay attention to your email please.
