Posted on Fri, 18 May 2018 06:46:32 +0000
As we know Nash rring vacuum pump(water ring vacuum pump) is widely used in the world. In order to offer customer top quality liquid ring vacuum pump and save customer’s cost, so we develop our model 2BE1&2BE3 and CL liquid ring vacuum pump& compressor. 1.100% same performance and d...
Read MorePosted on Fri, 18 May 2018 06:45:18 +0000
Because the rotary vacuum filter during its operation will carries out moisture, the wet type vacuum pump will always be chosen and the dry type vacuum pumps are not the ideal in this application.During a process upset, such as failure of the filtrate pump, slugs of liquid can carry over into the...
Read MorePosted on Fri, 18 May 2018 06:44:45 +0000
If working medium contains water vapor, rotary vane pump can be selected irrespective water ring pump or vacuum unit, but a condensator is required at the inlet of the rotary vane pump so that the vapor is liquefied before entering the pump chamber. Since the condesator can not liquefy all vapor,...
Read MorePosted on Fri, 18 May 2018 06:43:49 +0000
As Supplement of pump and motor, we provide complete set of pump unit, such as 2BE series, 2BV series, 2SY series and 2SK series. including separator, heat exchanger and connecting pipes, thus to reduce customer installation period. Water ot Chemical solvent is recycled as operating liquid, this ...
Read MorePosted on Fri, 18 May 2018 06:43:21 +0000
We supplied water ring vacuum pump to the power plant industry for condenser venting.The feature is ensuring the maximum amount of condensing before the gas enters the vacuum pump, much like a direct contact condenser. Our designed water ring vacuum pumps or water ring vacuum systems allow the pu...
Read MorePosted on Fri, 18 May 2018 06:40:56 +0000
Why vacuum pump should be adopted for oil-filling in transformer ? Becuase vacuum condition can avoid oil being oxidized that would decrease the insulation degree of tranfromer. Transformer above 220kV must adopt vacuum oil-filling. It is suggested to be used for 110kV tranformer. Oil filling wor...
Read MorePosted on Fri, 18 May 2018 06:37:21 +0000
Screw many factors affect the operating characteristics, wherein the amount of interference between the rotor and the stator and rotor speed, these two are the main factors 2.1Interference effect: Screw Works decided to guarantee a certain pump efficiency, it is necessary that the stator, ...
Read MorePosted on Fri, 18 May 2018 06:36:38 +0000
In addition to the typical cutting element vacuum technology and general technical requirements in the design of the product must be considered, the vacuum system valve is also bound by special request. The minimum displaced ultimate pressure and the high flow resistance of components in t...
Read MorePosted on Fri, 18 May 2018 06:36:03 +0000
Our company introduced the third generation of Roots vacuum pump ZJP – GK series roots vacuum pump performance indicators: Puming speed :ZJP-150GK/300/600/1200 Ultimate pressure (Pa. The partial pressure):(former level for the single-stage rotary piston pump) Motor power (kW):2.2 / 4 / 7....
Read MorePosted on Fri, 18 May 2018 06:35:32 +0000
Global Vacuum Pump Market Forecast and Opportunities, 2019 The global market for vacuum pumps is forecast to grow at a CAGR of around 5% till 2019. The global vacuum pumps market is highly consolidated. While chemical processing industry is the major end-user industry for the global vacuum...
Read More
