Vacuum pump system maintenance

Posted on Fri, 28 Sep 2018 02:54:36 +0000

The quality of the vacuum pump system depends on its machine layout and the quality of the oil. It must be maintained when the vacuum pump is used. If distillation of volatile organic solvents, organic solvents will be oil absorption effect increased vapor pressure, thereby reducing the efficienc...

+ Continue reading

High speed direct rotary vane vacuum pump

Posted on Thu, 27 Sep 2018 03:05:34 +0000

High speed direct rotary vane vacuum pump. It is a new branch product of rotary vane vacuum pump. The old rotary vane pump appeared earlier. It is a product with simple structure and wide application. However, the rotary speed of this kind of old structure is low, most of which is about 400r/min....

+ Continue reading

Oil Diffusion Vacuum Pump concept

Posted on Thu, 27 Sep 2018 02:50:36 +0000

The diffusion pump uses a high-speed steam direct injection pump to decompose the gas at the throat of the throat. In 1915, hosted by Wolfgang Gade and using mercury vapors, they were high vacuum free molecular flows in which the movement of gaseous molecules could be better understood than conve...

+ Continue reading

Vacuum Parts bellows

Posted on Wed, 26 Sep 2018 02:55:59 +0000

What is bellows? The bellows in vacuum parts are tubular elastic sensing elements connected by foldable wrinkles in the direction of folding and stretching. Bellows are widely used in instruments and meters. They are mainly used as measuring elements of pressure measuring instruments to convert p...

+ Continue reading

Roots vacuum pump manufacturer

Posted on Wed, 26 Sep 2018 02:19:49 +0000

Roots vacuum pump is equipped with two blade rotors which rotate in opposite directions synchronously. There are small clearances between the rotors and between the rotors and the inner wall of the pump shell, but they do not contact each other. Roots vacuum pump is characterized by fast start-up...

+ Continue reading

Vacuum system structure

Posted on Tue, 25 Sep 2018 03:32:36 +0000

A complete vacuum system consists of a wide range of vacuum application equipment, vacuum system column mainly describes the design of the main parameters in the vacuum system, the calculation of the pumping time, the influence of the exhaust on the vacuum system, the selection of vacuum pumping ...

+ Continue reading

Vacuum pump mechanical installation

Posted on Tue, 25 Sep 2018 03:18:48 +0000

Vacuum pump is a device that produces, improves and maintains vacuum in a closed space by various means. Vacuum pump can be defined as: mechanical, physical, chemical or physicochemical methods to be pumped by the container to obtain a vacuum device or equipment. With the development of vacuum ap...

+ Continue reading

Rotary vane vacuum pumping speed

Posted on Fri, 21 Sep 2018 02:48:32 +0000

Rotary vane vacuum pump is an oil sealed mechanical vacuum pump. It belongs to the low vacuum pump. It can be used alone or as a front pump for other high vacuum pumps or ultra high vacuum pumps. It has been widely used in metallurgy, machinery, military industry, electronics, chemical industry, ...

+ Continue reading

Water ring vacuum unit

Posted on Fri, 21 Sep 2018 02:23:36 +0000

Water ring pump unit can be widely used in vacuum distillation, vacuum evaporation, dehydration and crystallization in chemical industry; freeze-drying in food industry; vacuum drying in pharmaceutical industry; polyester chips in light textile industry; vacuum system in high altitude simulation ...

+ Continue reading

Liquid Ring Vacuum Pump structure

Posted on Thu, 20 Sep 2018 03:00:05 +0000

The liquid ring vacuum pump is mainly composed of pump body, impeller, end face disc and pump body end cover, as shown in the following figure. liquid ring vacuum pump of basic structure diagram Pump body: The machining precision of the inner cavity is not high, but the casting blank is required...

+ Continue reading