Posted on Wed, 01 Jun 2022 03:34:28 +0000
Characteristics of liquid ing chlorine gas compressors do not require high water content in chlorine (the mass fraction of water in chlorine is less than 400 ppm), and the price is cheap. Domestic small centrifugal compressors generally require the mass fraction of water in chlorine to be below 2...
Read MorePosted on Fri, 27 May 2022 06:39:36 +0000
Molecular pump is a kind of vacuum pump that uses a high-speed rotating rotor to transmit momentum to gas molecules, so that they can obtain a directional speed, which is compressed and driven to the exhaust port and then pumped away for the front stage. Since the profile groove of the simple tra...
Read MorePosted on Mon, 23 May 2022 02:39:48 +0000
The inlet and exhaust flange standards of the water ring vacuum pump produced by our company can be DIN, ANSI. If the customer has other special requirements, please confirm with our company before placing an order. For its flange styles, if the customer has no special requirements, all flange st...
Read MorePosted on Fri, 20 May 2022 03:44:04 +0000
For example 1.0 E -2; 2.3 E 3 Digital display vacuum gauge is widely used to obtain vacuum value in vacuum industry. Here are two examples to help you quickly figure out how to correctly read the value of the digital display vacuum gauge. Generally speaking, there are various units for vacuum gau...
Read MorePosted on Mon, 16 May 2022 03:31:37 +0000
Molecular pump is a common equipment for obtaining high vacuum and ultra-high vacuum. There is a high-speed rotating rotor inside the molecular pump, and the bearing supporting the smooth rotation of the rotor bears a large load. Correct use and timely maintenance are of great significance to the...
Read MorePosted on Fri, 13 May 2022 02:34:14 +0000
When the water ring vacuum pump is designed as a closed cycle unit, many customers will require the unit to be designed automatically. Then this automatic meaning usually refers to the automatic configuration of instrumentation! Mainly refers to: 1.Automatic water replenishment solenoid valve and...
Read MorePosted on Fri, 06 May 2022 03:07:54 +0000
How to select the suitable vacuum pump for molding machine? The rotary vane pump has a good and wide application in this process. The selection of the vacuum pump of the blister machine needs to select the appropriate vacuum pump according to the specific process. Generally, the following two par...
Read MorePosted on Tue, 03 May 2022 02:47:16 +0000
Molecular pumps may involve different installation methods during the use of the unit, so can all molecular pumps be installed at any angle? Our molecular pumps FB-300 (300L/s), FB-650 (650L/s), FB-1300 (1300L/s), FB-2000 (2000L/s) can be either air-cooling or water-cooling, even when they are wa...
Read MorePosted on Fri, 29 Apr 2022 01:47:38 +0000
The temperature of the operating fluid of the liquid ring vacuum pump should not exceed 40C in theory, and the suction medium should not exceed 70C. Then, what if the pumping medium of the pump is 90°C, can the liquid ring vacuum pump be used? What is the service life of 304 stainless steel impel...
Read MorePosted on Mon, 25 Apr 2022 02:14:07 +0000
Hard candy is the hardest kind of candy. It is boiled at high temperature and has a low water content. Its obvious characteristics are that it is brittle and mostly transparent and glass-like. Hard candies are divided into different categories according to different crafts, shapes, packaging, col...
Read More
