Posted on Wed, 09 Oct 2024 02:14:25 +0000
The helium mass spectrometer leak detector has shown significant advantages and accuracy in the application of leak detection for fire equipment steel cylinders. The following is a specific explanation about its application: The importance of leak detection for fire equipment steel cylinders Fire...
Read MorePosted on Tue, 08 Oct 2024 02:05:54 +0000
The helium mass spectrometer leak detector used in power plants is mainly used for leak detection of external vacuum devices of gas turbines, as well as for leakage of condensing tanks. Because any leakage in each unit will increase manufacturing costs, leak detection in power plants is crucial i...
Read MorePosted on Thu, 03 Oct 2024 07:07:23 +0000
Many materials such as heavy petroleum residues, chemicals, medicines, natural foods, health products, fatty acids, etc. are often heat-sensitive, viscous and/or have high boiling points. To separate these materials from their other components and maintain the quality of the product, they can onl...
Read MorePosted on Mon, 23 Sep 2024 01:56:02 +0000
Liquid ring vacuum pump in chlor-Alkali industry of application Chlor-alkali industry The chlor-alkali industry is the industry that produces chlorine (Cl2) and alkali, sodium hydroxide (NaOH) or potassium hydroxide (KOH), by electrolysis of a salt solution. The main technologies applied for chlo...
Read MorePosted on Fri, 06 Sep 2024 01:52:41 +0000
Liquid ring vacuum pump in wastewater treatment of application and advantages With the increasing environmental protection and the growing demand for wastewater treatment, efficient and energy-saving wastewater treatment technology has attracted much attention. Liquid ring vacuum pump have been w...
Read MorePosted on Fri, 23 Aug 2024 03:10:37 +0000
How to use a helium mass spectrometer leak detector to avoid contamination caused by vacuum pump oil (1) The container for oil must be clean and must not be exposed to sunlight or stored outdoors. It should be stored in a dark, dry, and well ventilated area to prevent the mixing of moisture and d...
Read MorePosted on Tue, 20 Aug 2024 02:07:41 +0000
Comparison of several maintenance methods for wear of hydrogen compressor shaft head The hydrogen compressor is mainly used to discharge the hydrogen collected from the water electrolysis tank to the compressor outside the ship. During the operation of the equipment, factors such as bearing lifes...
Read MorePosted on Fri, 09 Aug 2024 06:45:53 +0000
What is vacuum lifting: The vacuum energy of the vacuum lifter is stored in the vacuum accumulator. Within one second, it can be transmitted to the suction cup and sucked instantly; within two seconds, the vacuum in the suction cup can return to an atmospheric pressure and be released instantly. ...
Read MorePosted on Mon, 08 Jul 2024 06:03:44 +0000
In a broad sense, the industry uses the method of electrolyzing saturated NaCl solution to produce NaOH, Cl2 and H2, and uses them as raw materials to produce a series of chemical products, which is called the chlor-alkali industry. In a narrow sense, the chlor-alkali industry mainly includes two...
Read MorePosted on Fri, 07 Jun 2024 01:23:47 +0000
1.Why is helium used to detect leaks? Helium is used as a tracer gas to detect leaks for several reasons. These include the fact that it constitutes only ~ 5 ppm in air so that background levels are very low. Helium has also relatively low mass so that it is ‘mobile’ and is completely inert/non-r...
Read More
